Sand Wiki - User contributions [en]

S&H Balcony, Inner Corner (L)

2026-06-09T15:21:34Z

Eman3619:

{{Module
| name = S&H Balcony, Inner Corner (L)
| image = S&H Balcony, Inner Corner (L).png
| dimensions = 1x1
| research = I(b). Balconies (multiple) {{Tag Tier1}}
| health = 300
| weight = 100
| cost 1 = 0
| cost 2 = 20
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>One of many ways to improve the trampler's ergonomics. Designed to facilitate movement around the compartments. Lightweight but fragile. This model can be installed in the inner corner between compartments.</blockquote>
[[Category:Trampler Components]]

NZ AzE81S Deck Motor-Reactor, Long

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = NZ AzE81S Deck Motor-Reactor, Long
| image = NZ AzE81S Deck Motor-Reactor, Long.png
| dimensions = 1x3
| research = I(a). Motor-Reactor {{Tag Tier1}}
| health = 6500
| weight = 2200
| energy_capacity = 40000
| rated_power = 75
| cost 1 = 0
| cost 2 = 50
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>The heart of the trampler. Provides power to all compartments of the trampler and its chassis. Created by Neue Zukunft, the motor-reactor converts aurogen from energy rods into huge amounts of energy. Destroying the reactor will cause a chain reaction throughout the whole trampler, detonating most of its compartments and rendering it completely inoperable.</blockquote>
[[Category:Trampler Components]]

S&H Standard Balcony

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H Standard Balcony
| image = S&H Standard Balcony.png
| dimensions = 1x1
| research = Kaiser's Friends {{Tag Tier1}}
| health = 200
| weight = 50
| cost 1 = 0
| cost 2 = 10
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>One of many ways to improve the trampler's ergonomics. Designed to facilitate movement around the compartments. Lightweight but fragile.</blockquote>
[[Category:Trampler Components]]

S&H MK4 Crew Cabin, 4 People

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H MK4 Crew Cabin, 4 People
| image = S&H MK4 Crew Cabin, 4 People.png
| dimensions = 2x2
| research = I(a). Crew Room {{Tag Tier1}}
| health = 3000
| weight = 1800
| energy_consumption = 5
| crew_slots = 4
| cost 1 = 0
| cost 2 = 25
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>These cabins were designed to sustain a trampler crew during long journeys. Every new shift starts here. Provides all the necessary means of comfort, including a refrigerator to store provisions and a ventilation system that provides improved air circulation on hot days. This particular design features increased room capacity and can sustain up to four crew members.</blockquote>
[[Category:Trampler Components]]

NZ AzE81L Deck Motor-Reactor, Rounded

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = NZ AzE81L Deck Motor-Reactor, Rounded
| image = NZ AzE81L Deck Motor-Reactor, Rounded.png
| dimensions = 2x2
| research = Godlewski's Expedition {{Tag Tier1}}
| health = 6500
| weight = 2200
| energy_capacity = 40000
| rated_power = 75
| cost 1 = 0
| cost 2 = 50
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>The heart of the trampler. Provides power to all compartments of the trampler and its chassis. Created by Neue Zukunft, the motor-reactor converts aurogen from energy rods into huge amounts of energy. Destroying the reactor will cause a chain reaction throughout the whole trampler, detonating most of its compartments and rendering it completely inoperable.</blockquote>
[[Category:Trampler Components]]

NZ AzE81S Motor-Reactor, Framed Long

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = NZ AzE81S Motor-Reactor, Framed Long
| image = NZ AzE81S Motor-Reactor, Framed Long.png
| dimensions = 1x3
| research = I(b). Motor-Reactor {{Tag Tier1}}
| health = 6500
| weight = 2500
| energy_capacity = 40000
| rated_power = 75
| cost 1 = 0
| cost 2 = 55
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>The heart of the trampler. Provides power to all compartments of the trampler and its chassis. Created by Neue Zukunft, the motor-reactor converts aurogen from energy rods into huge amounts of energy. Destroying the reactor will cause a chain reaction throughout the whole trampler, detonating most of its compartments and rendering it completely inoperable. It has been further modified by Kaiser's Friends to be able to carry other compartments on top of the frames installed on this compartment.</blockquote>
[[Category:Trampler Components]]

S&H MK2 Crew Cabin, 2 People

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H MK2 Crew Cabin, 2 People
| image = S&H MK2 Crew Cabin, 2 People.png
| dimensions = 1x2
| research = Godlewski's Expedition {{Tag Tier1}}
| health = 2000
| weight = 1500
| energy_consumption = 3
| crew_slots = 2
| cost 1 = 0
| cost 2 = 20
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>These cabins were designed to sustain a trampler crew during long journeys. Every new shift starts here. Provides all the necessary means of comfort, including a refrigerator to store provisions and a ventilation system that provides improved air circulation on hot days.</blockquote>
[[Category:Trampler Components]]

S&H MK1 Crew Cabin, Single

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H MK1 Crew Cabin, Single
| image = S&H MK1 Crew Cabin, Single.png
| dimensions = 1x1
| research = Godlewski's Expedition {{Tag Tier1}}
| health = 1500
| weight = 800
| energy_consumption = 2
| crew_slots = 1
| cost 1 = 0
| cost 2 = 15
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>These cabins were designed to sustain a trampler crew during long journeys. Every new shift starts here. Provides all the necessary means of comfort, including a refrigerator to store provisions and a ventilation system that provides improved air circulation on hot days. The compact model is designed for personal use.</blockquote>
[[Category:Trampler Components]]

S&H Captain's Cabin

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H Captain's Cabin
| image = S&H Captain's Cabin.png
| dimensions = 1x1+
| research = Godlewski's Expedition {{Tag Tier1}}
| health = 3500
| weight = 2000
| energy_consumption = 3
| crew_slots = 1
| cost 1 = 0
| cost 2 = 25
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A crew compartment specially designed for the trampler's captain. The standard equipment includes a personal refrigerator and reinforced armor. The cabin also houses the Trampler Ownership Device, "IO". Crew access to doors and other trampler functions is granted and overwritten exclusively through this device.</blockquote>
[[Category:Trampler Components]]

S&H Deck, Standard

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H Deck, Standard
| image = S&H Deck, Standard.png
| dimensions = 1x1
| research = Kaiser's Friends {{Tag Tier1}}
| health = 200
| weight = 100
| cost 1 = 0
| cost 2 = 5
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A platform that improves the trampler's ergonomics. Provides more comfortable navigation on the roofs of compartments. Equipped with railings to prevent the crew from falling overboard or unauthorized persons from entering. Can only be installed on top of load-bearing structures like chassis and solid compartments.</blockquote>
[[Category:Trampler Components]]

S&H Cargo Deck, L-Shape

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H Cargo Deck, L-Shape
| image = S&H Cargo Deck, L-Shape.png
| dimensions = 1x1
| research = Kaiser's Friends {{Tag Tier1}}
| health = 2000
| weight = 800
| item_slots = 192
| cost 1 = 0
| cost 2 = 25
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A compartment designed for transporting small loads. Ensures that all items placed on its shelves will remain intact during Trampler Deployment and Evacuation. A cheaper version with increased capacity achieved through a complete lack of protection.</blockquote>
[[Category:Trampler Components]]

S&H Cargo Deck, Light

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H Cargo Deck, Light
| image = S&H Cargo Deck, Light.png
| dimensions = 1x1
| research = Kaiser's Friends {{Tag Tier1}}
| health = 1500
| weight = 400
| item_slots = 96
| cost 1 = 0
| cost 2 = 15
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A compartment designed for transporting small loads. Ensures that all items placed on its shelves will remain intact during trampler deployment and evacuation. An inexpensive option, at the cost of no protection from explosions or burglars. A lighter version of the regular cargo deck that has only one rack with shelves.</blockquote>
[[Category:Trampler Components]]

S&H Cargo Deck

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H Cargo Deck
| image = S&H Cargo Deck.png
| dimensions = 1x1
| research = Kaiser's Friends {{Tag Tier1}}
| health = 2000
| weight = 800
| item_slots = 192
| cost 1 = 0
| cost 2 = 25
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A compartment designed for transporting small loads. Ensures that all items placed on its shelves will remain intact during Trampler Deployment and Evacuation. An inexpensive option, the increase in capacity comes at the cost of no protection from explosions or burglars.</blockquote>
[[Category:Trampler Components]]

S&H Framed Stairs

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H Framed Stairs
| image = S&H Framed Stairs.png
| dimensions = 1x1
| research = I(b). Framed Stairs {{Tag Tier1}}
| health = 400
| weight = 200
| cost 1 = 0
| cost 2 = 5
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Stairs attached to a frame, making the traversal between trampler levels easier. This model provides more space for walking and is a bit sturdier than mounted stairs.</blockquote>
[[Category:Trampler Components]]

S&H Mounted Stairs, Right

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H Mounted Stairs, Right
| image = S&H Mounted Stairs, Right.png
| dimensions = 1x1
| research = I(a). Stairs (multiple) {{Tag Tier1}}
| health = 250
| weight = 100
| cost 1 = 0
| cost 2 = 30
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Designed to improve the trampler's ergonomics by allowing easier movement between trampler levels. Was commonly used by builders on "Sternenwerft Hofbauer GmbH & Co. KG" tramplers during colonization.</blockquote>
[[Category:Trampler Components]]

S&H Mounted Stairs, Left

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H Mounted Stairs, Left
| image = S&H Mounted Stairs, Left.png
| dimensions = 1x1
| research = I(a). Stairs (multiple) {{Tag Tier1}}
| health = 250
| weight = 100
| cost 1 = 0
| cost 2 = 30
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Designed to improve the trampler's ergonomics by allowing easier movement between trampler levels. Was commonly used by builders on "Sternenwerft Hofbauer GmbH & Co. KG" tramplers during colonization.</blockquote>
[[Category:Trampler Components]]

S&H Lower Corner Supporting Frame (R)

2026-06-09T15:01:01Z

Eman3619: 1 revision imported

{{Module
| name = S&H Lower Corner Supporting Frame (R)
| image = S&H Lower Corner Supporting Frame (R).png
| dimensions = 1x1
| research = Kaiser's Friends {{Tag Tier1}}
| health = 400
| weight = 150
| cost 1 = 0
| cost 2 = 5
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Supporting frames that were designed to be mounted on walls to support decks and other structures above them. They were often used on Sternenwerft Hofbauer GmbH & Co. KG tramplers to save space and make them more maneuverable on construction sites.</blockquote>
[[Category:Trampler Components]]

S&H Lower Corner Supporting Frame (L)

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Lower Corner Supporting Frame (L)
| image = S&H Lower Corner Supporting Frame (L).png
| dimensions = 1x1
| research = Kaiser's Friends {{Tag Tier1}}
| health = 400
| weight = 150
| cost 1 = 0
| cost 2 = 5
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Supporting frames that were designed to be mounted on walls to support decks and other structures above them. They were often used on Sternenwerft Hofbauer GmbH & Co. KG tramplers to save space and make them more maneuverable on construction sites.</blockquote>
[[Category:Trampler Components]]

S&H Lower Supporting Frame

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Lower Supporting Frame
| image = S&H Lower Supporting Frame.png
| dimensions = 1x1
| research = Kaiser's Friends {{Tag Tier1}}
| health = 400
| weight = 200
| cost 1 = 0
| cost 2 = 5
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Supporting frames that were designed to be mounted on walls to support decks and other structures above them. They were often used on Sternenwerft Hofbauer GmbH & Co. KG tramplers to save space and make them more maneuverable on construction sites.</blockquote>
[[Category:Trampler Components]]

S&H Supporting Frame, Triangle

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Supporting Frame, Triangle
| image = S&H Supporting Frame, Triangle.png
| dimensions = 1x1
| research = Kaiser's Friends {{Tag Tier1}}
| health = 400
| weight = 150
| cost 1 = 0
| cost 2 = 5
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>An additional load-bearing frame that allows the placement of decks without blocking the space below them. More lightweight than solid compartments but more fragile.</blockquote>
[[Category:Trampler Components]]

S&H Supporting Frame

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Supporting Frame
| image = S&H Supporting Frame.png
| dimensions = 1x1
| research = Kaiser's Friends {{Tag Tier1}}
| health = 400
| weight = 200
| cost 1 = 0
| cost 2 = 5
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>An additional load-bearing frame that allows the placement of decks without blocking the space below them. More lightweight than solid compartments but more fragile.</blockquote>
[[Category:Trampler Components]]

S&H Atm.Fs 77B-L Small Chassis

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Atm.Fs 77B-L Small Chassis
| image = S&H Atm.Fs 77B-L Small Chassis.png
| dimensions = 2x4
| research = Godlewski's Expedition {{Tag Tier1}}
| weight_capacity = 20000
| energy_consumption = 3
| cost 1 = 0
| cost 2 = 35
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Used by small construction tramplers owned by Sternenwerft Hofbauer GmbH & Co. KG. Tramplers built on this chassis are capable of operating in hard-to-reach places due to their compact design and high maneuverability. However, load capacity is not among their strong points.</blockquote>
[[Category:Trampler Components]]

S&H Atm.Fs 77B-Q Small Chassis

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Atm.Fs 77B-Q Small Chassis
| image = S&H Atm.Fs 77B-Q Small Chassis.png
| dimensions = 3x3
| research = I(a). Small Chassis {{Tag Tier1}}
| weight_capacity = 20000
| energy_consumption = 3
| cost 1 = 0
| cost 2 = 25
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Used by small construction tramplers owned by Sternenwerft Hofbauer GmbH & Co. KG. Tramplers built on this chassis are capable of operating in hard-to-reach places due to their compact design and high maneuverability. However, load capacity is not among their strong points.</blockquote>
[[Category:Trampler Components]]

KF-Q "Well" Small Chassis

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = KF-Q "Well" Small Chassis
| image = KF-Q "Well" Small Chassis.png
| dimensions = 3x3
| research = I(b). Small Chassis {{Tag Tier1}}
| weight_capacity = 20000
| energy_consumption = 3
| cost 1 = 0
| cost 2 = 45
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Kaiser's Friends mechanics found out that the chassis can function perfectly well without its central section. However, it takes a few more materials to hold it together. They made sure to fully utilize this newfound discovery on every chassis variation they could lay their hands on.</blockquote>
[[Category:Trampler Components]]

S&H Lower Supporting Frame Extended (L&R)

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Lower Supporting Frame Extended (L&R)
| image = S&H Lower Supporting Frame Extended (L&R).png
| dimensions = 1x3
| research = Kaiser's Friends {{Tag Tier1}}
| health = 800
| weight = 500
| cost 1 = 0
| cost 2 = 10
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Supporting frames that were designed to be mounted on walls to support decks and other structures above them. They were often used on Sternenwerft Hofbauer GmbH & Co. KG tramplers to save space and make them more maneuverable on construction sites.</blockquote>
[[Category:Trampler Components]]

S&H Lower Supporting Frame Extended (L)

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Lower Supporting Frame Extended (L)
| image = S&H Lower Supporting Frame Extended (L).png
| dimensions = 1x2
| research = Kaiser's Friends {{Tag Tier1}}
| health = 600
| weight = 350
| cost 1 = 0
| cost 2 = 10
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Supporting frames that were designed to be mounted on walls to support decks and other structures above them. They were often used on Sternenwerft Hofbauer GmbH & Co. KG tramplers to save space and make them more maneuverable on construction sites.</blockquote>
[[Category:Trampler Components]]

S&H Lower Supporting Frame Extended (R)

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Lower Supporting Frame Extended (R)
| image = S&H Lower Supporting Frame Extended (R).png
| dimensions = 1x2
| research = Kaiser's Friends {{Tag Tier1}}
| health = 600
| weight = 350
| cost 1 = 0
| cost 2 = 10
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Supporting frames that were designed to be mounted on walls to support decks and other structures above them. They were often used on Sternenwerft Hofbauer GmbH & Co. KG tramplers to save space and make them more maneuverable on construction sites.</blockquote>
[[Category:Trampler Components]]

S&H Balcony, Extended L&R

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Balcony, Extended L&R
| image = S&H Balcony, Extended L&R.png
| dimensions = 3x1
| research = I(b). Balconies (multiple) {{Tag Tier1}}
| health = 200
| weight = 75
| cost 1 = 0
| cost 2 = 20
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>One of many ways to improve the trampler's ergonomics. Designed to facilitate movement around the compartments. Lightweight but fragile. This model extends beyond the dimensions of the standard compartment on both sides to allow for connection to additional balconies.</blockquote>
[[Category:Trampler Components]]

S&H Balcony, Extended Right

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Balcony, Extended Right
| image = S&H Balcony, Extended Right.png
| dimensions = 2x1
| research = I(b). Balconies (multiple) {{Tag Tier1}}
| health = 200
| weight = 75
| cost 1 = 0
| cost 2 = 15
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>One of many ways to improve the trampler's ergonomics. Designed to facilitate movement around the compartments. Lightweight but fragile. This model extends beyond the dimensions of the standard compartment rightwards to allow for connection to additional balconies.</blockquote>
[[Category:Trampler Components]]

S&H Balcony, Extended Left

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Balcony, Extended Left
| image = S&H Balcony, Extended Left.png
| dimensions = 2x1
| research = I(b). Balconies (multiple) {{Tag Tier1}}
| health = 200
| weight = 75
| cost 1 = 0
| cost 2 = 15
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>One of many ways to improve the trampler's ergonomics. Designed to facilitate movement around the compartments. Lightweight but fragile. This model extends beyond the dimensions of the standard compartment leftwards to allow for connection to additional balconies.</blockquote>
[[Category:Trampler Components]]

S&H Deck, Standard (no railings)

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Deck, Standard (no railings)
| image = S&H Deck, Standard (no railings).png
| dimensions = 1x1
| research = I(a). Wooden Decks (multiple) {{Tag Tier1}}
| health = 200
| weight = 100
| cost 1 = 0
| cost 2 = 5
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A platform that improves the trampler's ergonomics, it provides more comfortable navigation on the roofs of compartments. It can only be installed on top of load-bearing structures like chassis and solid compartments. This particular model comes with the railings removed.</blockquote>
[[Category:Trampler Components]]

S&H Canopy Deck

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Canopy Deck
| image = S&H Canopy Deck.png
| dimensions = 1x2
| research = I(a). Wooden Decks (multiple) {{Tag Tier1}}
| health = 300
| weight = 150
| cost 1 = 0
| cost 2 = 10
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A simple set of decks covered with a canopy. Protects your head from the harsh heat of Sophie or anything that falls from above.</blockquote>
[[Category:Trampler Components]]

S&H Deck, Round-Beveled

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Deck, Round-Beveled
| image = S&H Deck, Round-Beveled.png
| dimensions = 2x1
| research = I(a). Wooden Decks (multiple) {{Tag Tier1}}
| health = 300
| weight = 150
| cost 1 = 0
| cost 2 = 10
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A platform that improves the trampler's ergonomics. Provides more comfortable navigation on the roofs of compartments. Equipped with railings to prevent the crew from falling overboard or unauthorized persons from entering. Can only be installed on top of load-bearing structures like chassis and solid compartments.</blockquote>
[[Category:Trampler Components]]

S&H Deck, Round (2x1)

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Deck, Round (2x1)
| image = S&H Deck, Round (2x1).png
| dimensions = 2x1
| research = I(a). Wooden Decks (multiple) {{Tag Tier1}}
| health = 300
| weight = 150
| cost 1 = 0
| cost 2 = 10
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A platform that improves the trampler's ergonomics. Provides more comfortable navigation on the roofs of compartments. Equipped with railings to prevent the crew from falling overboard or unauthorized persons from entering. Can only be installed on top of load-bearing structures like chassis and solid compartments.</blockquote>
[[Category:Trampler Components]]

S&H Deck, Round (1x1)

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Deck, Round (1x1)
| image = S&H Deck, Round (1x1).png
| dimensions = 1x1
| research = I(a). Wooden Decks (multiple) {{Tag Tier1}}
| health = 200
| weight = 100
| cost 1 = 0
| cost 2 = 5
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A platform that improves the trampler's ergonomics. Provides more comfortable navigation on the roofs of compartments. Equipped with railings to prevent the crew from falling overboard or unauthorized persons from entering. Can only be installed on top of load-bearing structures like chassis and solid compartments.</blockquote>
[[Category:Trampler Components]]

S&H Deck, Beveled (1x2)

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Deck, Beveled (1x2)
| image = S&H Deck, Beveled (1x2).png
| dimensions = 1x2
| research = I(a). Wooden Decks (multiple) {{Tag Tier1}}
| health = 300
| weight = 150
| cost 1 = 0
| cost 2 = 10
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A platform that improves the trampler's ergonomics. Provides more comfortable navigation on the roofs of compartments. Equipped with railings to prevent the crew from falling overboard or unauthorized persons from entering. Can only be installed on top of load-bearing structures like chassis and solid compartments.</blockquote>
[[Category:Trampler Components]]

S&H Deck, Beveled (1x1)

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Deck, Beveled (1x1)
| image = S&H Deck, Beveled (1x1).png
| dimensions = 1x1
| research = I(a). Wooden Decks (multiple) {{Tag Tier1}}
| health = 200
| weight = 100
| cost 1 = 0
| cost 2 = 5
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A platform that improves the trampler's ergonomics. Provides more comfortable navigation on the roofs of compartments. Equipped with railings to prevent the crew from falling overboard or unauthorized persons from entering. Can only be installed on top of load-bearing structures like chassis and solid compartments.</blockquote>
[[Category:Trampler Components]]

S&H Cargo Deck, Framed Light

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Cargo Deck, Framed Light
| image = S&H Cargo Deck, Framed Light.png
| dimensions = 1x1
| research = I(a). Cargo Deck {{Tag Tier1}}
| health = 1750
| weight = 500
| item_slots = 96
| cost 1 = 0
| cost 2 = 25
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A compartment designed for transporting small loads. Ensures that all items placed on its shelves will remain intact during trampler deployment and evacuation. An inexpensive option, at the cost of no protection from explosions or burglars. A lighter version of the regular cargo deck that has only one rack with shelves.</blockquote>
[[Category:Trampler Components]]

S&H Cargo Deck, Framed

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Cargo Deck, Framed
| image = S&H Cargo Deck, Framed.png
| dimensions = 1x1
| research = I(a). Cargo Deck {{Tag Tier1}}
| health = 2500
| weight = 1000
| item_slots = 192
| cost 1 = 0
| cost 2 = 45
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A compartment designed for transporting small loads. Ensures that all items placed on its shelves will remain intact during Trampler Deployment and Evacuation. An inexpensive option, the increase in capacity comes at the cost of no protection from explosions or burglars.</blockquote>
[[Category:Trampler Components]]

S&H Cargo Deck, Framed L-Shape

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H Cargo Deck, Framed L-Shape
| image = S&H Cargo Deck, Framed L-Shape.png
| dimensions = 1x1
| research = I(a). Cargo Deck {{Tag Tier1}}
| health = 2500
| weight = 1000
| item_slots = 192
| cost 1 = 0
| cost 2 = 45
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A compartment designed for transporting small loads. Ensures that all items placed on its shelves will remain intact during Trampler Deployment and Evacuation. A cheaper version with increased capacity achieved through a complete lack of protection.</blockquote>
[[Category:Trampler Components]]

S.Trs Turret Deck

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S.Trs Turret Deck
| image = S.Trs Turret Deck.png
| dimensions = 1x1
| research = K.K. Landwehr {{Tag Tier1}}
| health = 2000
| weight = 1200
| cost 1 = 0
| cost 2 = 50
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>The lower support of the gun carriage, mounted on a reinforced deck. Designed to accommodate the full range of available artillery weapons.</blockquote>
[[Category:Trampler Components]]

S&H M78r Framed Steering Deck

2026-06-09T15:01:00Z

Eman3619: 1 revision imported

{{Module
| name = S&H M78r Framed Steering Deck
| image = S&H M78r Framed Steering Deck.png
| dimensions = 2x1
| research = I(c). Large Framed Steering (multiple) {{Tag Tier1}}
| health = 2500
| weight = 1000
| energy_consumption = 3
| cost 1 = 0
| cost 2 = 30
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>S&H engineers have combined every trampler movement control into one module, making it a universal control point. Marching, turning, sidestep, emergency brake. They even installed a horn! This version has improved ergonomics and allows you to install other compartments on top of it.</blockquote>
[[Category:Trampler Components]]

S&H Entrance Vestibule

2026-06-09T15:00:59Z

Eman3619: 1 revision imported

{{Module
| name = S&H Entrance Vestibule
| image = S&H Entrance Vestibule.png
| dimensions = 1x1
| research = I(a). Wooden Vestibule {{Tag Tier1}}
| health = 800
| weight = 400
| cost 1 = 100
| cost 2 = 50
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A crucial part of any trampler. The ladder significantly eases the process of climbing onto the trampler. A fully enclosed entrance with a vestibule provides enhanced security measures. This compartment cannot be installed on top of other compartments or chassis, as the access hatch with the ladder is mounted in its lower deck.</blockquote>
[[Category:Trampler Components]]

S&H M78r Flybridge

2026-06-09T15:00:59Z

Eman3619: 1 revision imported

{{Module
| name = S&H M78r Flybridge
| image = S&H M78r Flybridge.png
| dimensions = 2x1
| research = I(b). Large Open Steering (multiple) {{Tag Tier1}}
| health = 2500
| weight = 800
| energy_consumption = 3
| cost 1 = 0
| cost 2 = 20
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>S&H engineers have combined every trampler movement control into one module, making it a universal control point. Marching, turning, sidestep, emergency brake. They even installed a horn!</blockquote>
[[Category:Trampler Components]]

S&H M78k Flybridge

2026-06-09T15:00:59Z

Eman3619: 1 revision imported

{{Module
| name = S&H M78k Flybridge
| image = S&H M78k Flybridge.png
| dimensions = 1x1
| research = K.K. Landwehr {{Tag Tier1}}
| health = 2000
| weight = 600
| energy_consumption = 2
| cost 1 = 0
| cost 2 = 15
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>S&H engineers have combined every trampler movement control into one compact module, making it a universal control point. Marching, turning, sidestep, emergency brake. They even installed a horn!</blockquote>
[[Category:Trampler Components]]

S&H Armaments Workbench

2026-06-09T15:00:59Z

Eman3619: 1 revision imported

{{Module
| name = S&H Armaments Workbench
| image = S&H Armaments Workbench.png
| dimensions = 1x1
| research = K.K. Landwehr {{Tag Tier1}}
| health = 1500
| weight = 700
| energy_consumption = 5
| cost 1 = 0
| cost 2 = 35
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Such workshops are an essential part of warships, where they are used to maintain the crew's weapons and ammunition. It has been refitted by scavengers into a full-fledged armory to allow the construction of weapons and ammunition from even the most primitive components found on the planet during expeditions. You might ask, "Why didn't they just use it on the space station?" Well, you can check the Saint Cristopher Station's "Rules of Habitat and Machinery Maintenance" Chapter 5, Article 32, Lines 24 to 32.</blockquote>
[[Category:Trampler Components]]

S&H Balcony, Inner Corner (L)

2026-06-09T15:00:59Z

Eman3619: 1 revision imported

S&H Compact Armaments Workshop

2026-06-09T15:00:59Z

Eman3619: 1 revision imported

{{Module
| name = S&H Compact Armaments Workshop
| image = S&H Compact Armaments Workshop.png
| dimensions = 1x1
| research = I(a). Small Armament Workshop {{Tag Tier1}}
| health = 2500
| weight = 1000
| energy_consumption = 7
| cost 1 = 50
| cost 2 = 100
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>Such workshops are an essential part of warships, where they are used to maintain the crew's weapons and ammunition. It has been refitted by scavengers into a full-fledged armory to allow the construction of weapons and ammunition from even the most primitive components found on the planet during expeditions. Installed in a more compact compartment for better ergonomics. You might ask, "Why didn't they just use it on the space station?" Well, you can check the Saint Cristopher Station's "Rules of Habitat and Machinery Maintenance" Chapter 5, Article 32, Lines 24 to 32.</blockquote>
[[Category:Trampler Components]]

S&H Fortified Entrance Area

2026-06-09T15:00:59Z

Eman3619: 1 revision imported

{{Module
| name = S&H Fortified Entrance Area
| image = S&H Fortified Entrance Area.png
| dimensions = 1x1
| research = K.K. Landwehr {{Tag Tier1}}
| health = 500
| weight = 200
| cost 1 = 0
| cost 2 = 10
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>A crucial part of any trampler. The ladder significantly eases the process of climbing onto the trampler. Solid walls and roof not only increase protection, but also allow for the installation of additional compartments on top.</blockquote>
[[Category:Trampler Components]]

KF "Nest" Framed Turret Deck

2026-06-09T15:00:59Z

Eman3619: 1 revision imported

{{Module
| name = KF "Nest" Framed Turret Deck
| image = KF "Nest" Framed Turret Deck.png
| dimensions = 1x1
| research = I(b). Framed Artillery Deck {{Tag Tier1}}
| health = 3000
| weight = 1200
| cost 1 = 0
| cost 2 = 75
| cost 3 = 0
| cost 4 = 0
}}
<blockquote>The lower support of the gun carriage, mounted on a reinforced deck. Designed to accommodate the full range of available artillery weapons. Engineers from the Kaiser's Friends gang additionally equipped it with a supporting frame, which allows other compartments to be installed on it.</blockquote>
[[Category:Trampler Components]]